Water Pumping Systems – Know How They Work

With round the clock water supply from the city storage tank, direct supply of water is done. But if that not the case, pumping of water throughout the building from the temporary storage tank has to be done. Below is what plumber in Mississauga talks about the functionality of pumps and how they work.

What are pumps?

Pumps are the mechanical devices which transfer water from lower to a higher level by the application of some external energy. Though the underlying principle of the pump is same, there are several types of pumps with varying working principle.

Working principle of the pumps is: As the pump is switched on it creates a vacuum in its inlet chamber and the air pressure pushes the water up the pump inlet chamber. Now this suction also varies with temperature.  Other factors that come into play are, pumping head, pump efficiency etc. Now let’s know about some of the most efficient types of pumps that one can select from. The types are Reciprocating pumps, Centrifugal pumps, Vertical submersible pumps, fully submersible pumps and jet pumps.

Reciprocating pump

Reciprocating pump has limited water discharge capacity, but they can generate very high pressure. The drawback with this kind of pump is that it has several moving parts and valves. Thus with dysfunction of any part as such, the system may not work. This kind of pump is used by plumber Toronto particularly for high pressure application.

Centrifugal pumps

The second kind of pump is Centrifugal pumps, these have lesser rotating parts as compared to a reciprocating pump, it can pump large volume of water and to great heights, by creating very high suction pressure. This kind of pump is to be selected for water supply in irrigation systems, or sewage for home appliances like washing machines, dish washers etc. Centrifugal pumps are site specific and can be used according to the requirement.

Vertical submersible pump

The third kind is the Vertical submersible pump, in this kind the pump is submerged in the liquid and is driven by a vertically mounted motor. Though the motor has to be kept way above the water level. Vertical pumps are most suitable for, automatic operation and difficult suction condition. This is mostly installed for cleaning purposes.

Fully submersible pump

The fourth kind is the fully submersible pump. In this kind both the pump and the motor is submerged in the liquid. In this system, the water acts as the coolant. They are also commonly called contractors pumps, as they are used for dewatering in the construction site. This system is a cost friendly as no separate pump hose is needed to install this.

Jet pump

The fifth and the final kind of pump is the Jet pump it has great efficiency to lift water to a height of 40 m. The principle is that additional energy is applied at the suction point which is again derived from the system itself.

Thus all the above designs available, gives us the freedom to choose best for the kind of purpose that need to be served. The one time investment on installation of pumps should be smart and wise.

Top 5 Plumbing Nightmares: Know How to Avoid Them

What underlies and unseen, plays an integral part of day to day life. Yes I am talking about the plumbing system, and the network of pipes that work 24×7 for us. First thing in the morning, as you rush to freshen up, you push the flush button and it does not work. It’s no less than a nightmare. You turn on the faucet and there is no water. What should have turned out to be a productive day, seem abruptly coming to an end leaving you all puzzled? Why go through such confusion, follow some of the simple steps to secure your plumbing system, let the turbulence in your life be gone. Here comes some of the trouble shooting areas you can take care of.

1. No water through the faucet-The prime reason to this is clogging of the pipes at some point. So always install strainers in the inlet part of the pipe. Keep the strainers checking every few month. If they seem to be broken or rusted, immediately change them. Call Plumber Toronto if professional service is required.

2.  Water heater-Cold water comes out, even after switching on the water heater. The most common reason to this is, not working of the water heater. But that does not sums up to the conclusion that you need to change your heater. Thermostat is safety equipment which protects the heater from burn out. Many a times, this device ceases to work. So the mere replacement of it, will restore the heater’s normal functioning.

3. No water after you flush-This could arise due to multiple reason, as the working of flush involves three to four steps. Water need to be collected in the flush tank, to flow in large volume when required. Due to clogging of water inlet, very little amount of water gets collected. Thus it takes ages to for the flush to work. Call a plumber and get it fixed.

4. Pungent smell of water-Once the over head tanks are installed, we seem to completely forget about it. Our atmosphere is overloaded with flora and fauna. Microscopic algae and fungi, has the capability to sneak inside this overhead tank as they grow very well in damp areas. They are responsible for multiple kinds of infections in humans. The only way to know their presence is, the smell of the water becomes pungent. Thus periodically the tank should be cleaned and chlorinated if required.

5. Dipping water-We get used to the ticking of the clock, same happens with dipping water. What we fail to notice is, dipping water is a sign. It says that your plumbing equipment needs shining. Using a sealant is a temporary solution. One has to look into the core of the problem. Metals are highly prone to corrosion. If the corroded part is not taken care of in due time, it may result into break down of the system.

These basic Mississauga plumbing tips will definitely keep a check on your system functions. Apart from this, do keep the contact number of an efficient plumber, who can rescue you from the crisis.